When a singer holds one steady note and a whole hall falls silent, what is actually happening? How does plain vibrating air turn into music, and how did Indian musicians build, from that one question, a system of seven swaras, hundreds of raags and a rhythm for every mood?
This course answers that question step by step. We begin where all music begins: with sound.
Sound is vibration
Every sound starts with something that vibrates: a tanpura string, the skin of a tabla, your own vocal cords. The vibrating object pushes the air next to it, that air pushes the air beyond it, and a wave travels outward until it reaches your ear. Sound needs a material to travel through, such as air, water or a wall. In empty space there is no sound.
Three qualities describe every sound you hear:
- Pitch: how high or low the sound seems. It depends on frequency, the number of vibrations per second, measured in hertz (Hz). More vibrations per second means a higher pitch.
- Loudness: how strong the sound feels. It depends on amplitude, the size of the vibration.
- Timbre (tone colour): the character that lets you tell a sitar from a flute even when both play the same note at the same loudness.
Pitch and string length
Stretch a rubber band between two fingers and pluck it. Now hold a shorter piece of it, or pull it tighter, and pluck again. The shorter or tighter band vibrates faster and sounds higher. A sitar player uses the same idea: pressing a string on a fret shortens the part that vibrates, so the pitch rises. A tabla player tunes the right-hand drum by tightening its skin, and a tighter skin also gives a higher pitch.
Musical sound and noise
In Sanskrit, musical sound is called nada. A musical sound has vibrations that repeat in a regular pattern, so the ear can settle on a steady pitch. Noise, such as a slammed door or heavy traffic, vibrates irregularly and has no clear pitch.
Old Indian texts treat nada as the raw material of music. The Sangita Ratnakara, written by Sharngadeva in the 13th century, separates ahata nada, the sound we make by striking a string or using the voice, from anahata nada, the “unstruck” sound that spiritual traditions speak of. For a music student, ahata nada is the one that matters, because it is the sound we can hear, sing and measure. The Natya Shastra, a Sanskrit text on drama, dance and music attributed to the sage Bharata, already discusses swaras and rhythm. Scholars place it somewhere between about 200 BCE and 200 CE, and its exact date is still debated.
The octave: doubling the frequency
If you sing a note and then the note one octave higher, the second note has exactly twice the frequency of the first. The Western concert note A is tuned to 440 Hz; the A one octave above is 880 Hz, and the A one octave below is 220 Hz. The ear hears these as “the same note, higher or lower”. That is why a child, a woman and a man can sing the same song together, each in a different octave, and it still sounds like one tune.
The Indian word for an octave is saptak. You will study it in the next lesson.
Sa is not a fixed pitch
Here is a big difference from a piano key, which has one fixed frequency. In Indian music the first swara, Sa, is not tied to any fixed frequency. Every performer chooses the Sa that suits their own voice or instrument. This chosen note is called the tonic, and every other swara is placed relative to it. A deep-voiced singer may choose a low Sa and a bansuri player a high one, yet both can perform the same raag.
To keep Sa clear in the ear, Indian music uses a drone: a steady background sound, played on the tanpura (also spelt tambura). A tanpura has four strings and no frets. A common tuning is Pa, Sa, Sa and a lower Sa. The player plucks the strings one after another in a slow cycle, and the overlapping sounds make a shimmering cloud of Sa that the performer can sing against.
Pa has a special bond with Sa. In the traditional “pure” tuning, Pa has a frequency ratio of 3 : 2 with Sa, which is why the two sound so restful together.
Sa and Pa in numbers
Suppose a singer chooses Sa = 240 Hz.
- Upper Sa, one octave higher: 240 × 2 = 480 Hz
- Pa: 240 × 3/2 = 360 Hz
- Lower Sa, one octave lower: 240 ÷ 2 = 120 Hz
Notice that 240, 360 and 480 are evenly spaced numbers: Pa is 120 Hz above Sa and 120 Hz below the upper Sa.
Find a Pa
A student sets Sa at 200 Hz. What are the frequencies of Pa and of the upper Sa?
Answer: Pa = 200 × 3/2 = 300 Hz, and the upper Sa = 200 × 2 = 400 Hz.
To find your own Sa, switch on a tanpura (a real one or a free app) and hum along. Choose the note at which you can hum comfortably, without strain, for a long time. That is a good Sa for you today. It may change a little as your voice matures.
Key points
- Sound is vibration travelling through a material; pitch depends on frequency (Hz), loudness on amplitude, and timbre on the source.
- One octave up means double the frequency (A 440 Hz becomes 880 Hz).
- In Indian music Sa is not fixed: each performer picks a tonic and measures all other swaras from it.
- The tanpura plays a continuous drone of Sa and Pa; Pa has a 3 : 2 ratio with Sa.